16 / 180
Erstinbetriebnahme / Konfiguration
016-023
Funkempfänger als Schaltsteckdose
1
• Funkempfänger in die Steckdose einstecken
• Kopplungstaste <1> 2 Sekunden gedrückt halten
2
,
die LED <2> blinkt rot
• Taste Einlernen <2> der Control Einheit 5 Sekunden
gedrückt halten. Die erfolgreiche Kopplung wird wie
folgt quittiert:
– Control Einheit: Ein Signalton und die LED <1> blinkt
grün
– Funkempfänger: LED blinkt grün
Hinweis: Blinkt die LED an der Control Einheit rot, sind
bereits 3 dieser Schaltsteckdosen gekoppelt. Eine andere
Schaltsteckdose kann erst nach dem Löschen der zuvor
gespeicherten Schaltsteckdosen gekoppelt werden (siehe
6.6).
1) hier: Nodon SmartPlug
2) 5 Sekunden gedrückt halten bei Permundo PSC 234.
2
1
Abb. [13]
1
2
Abb. [14]