13
5.7
Pre-record Voice Message
Alarm panel will play a pre-recorded voice message in the alarm call. As follow:
Picture 5-2
As picture 5-2, press
【
menu
】
to enter main menu. Press
【
4
】
to enter message recording, and then press
【
1
】
to start recording , speak your message to the panel for recording.
System will record 10 seconds and then automatically exit. Massage should be simple like “This is
whose house be intruded, please help”.
5.8
Add Accessories
Picture 5-3
5.8.1 Add remote control
As picture 5-3, Press
【
menu
】
to enter main menu. Press
【
2
】
to enter Add accessories.
Press
【
1
】
to enter add remote control, the menu would be indicate that "type the Number (00~99)", if add
1
st
remote control, please input 01, add 22th remote control, please input 22, then press
【
OK
】
to save the
settings.Then press any key of the remote control to send a signal to the alarm panel,voice prompt "Set
successful" and LCD display "has been saved" means add successful. If beep only once means this
remote control has been configured before and cannot be added again. If want to add more remote
control, can press any key of other remote control. Alarm panel can configure up to 150 remote control
of different coding.
5.8.2 Delete the remote control
As picture 5-3, press
【
3
】
to enter Del remote control, then display "type the Number (00~99)". If delete
1st remote control, please input 01; delete 22th remote control, then input 22; press
【
**
】
(Input
【
Arming
】
as “*” ) to delete all remote controls. Later press
【
OK
】
to delete certain zones remote control or all
remote controls.
