18
Operation of the self-propelled implement
7.3 Parking the internal combustion engine
•
Before switching off the combustion engine, make sure that the control lever (Fig.7.1, item 1)
is in the horizontal position and the PTO lever (Fig.7.1, item 2) is in the "off" position ,
•
Move the throttle lever (Fig.7.1, item 6) to neutral and allow the engine to idle for
approximately one-half minute.
•
Set the engine off switch located on the internal combustion engine to "0".
•
Close the fuel tap
•
Secure the towing vehicle against unauthorized use and, if necessary, remove the ignition
key.
•
Secure the device against rolling away by using wheel chocks or if necessary by operating the
parking brake.
Tip
:
In case of prolonged downtime, do not stop the engine with the "Engine off switch", but close the
fuel cock and let the engine run until it comes to a standstill by itself. Thus, the carburettor is
empty and no gumming can occur. This procedure must not be carried out in confined spaces,
otherwise there is danger of suffocation. Basically pay attention to adequate ventilation!
