20
Operation of the self-propelled implement
7.5 Height adjustment of the hand rail
The hand rail is adjustable in inclination angle to ensure the operator an ergonomically optimal
working height.
1. Loosen the rotary knob (Fig.7.3, item 1).
2. Shake the handgrip until the toothed washers are free.
3. Bring the handrail to the desired height and insert it into the appropriate catch.
4. Retighten the twist grip (Fig.7.3; item 1).
1
Figure 7.3
Figure 7.4
Note:
The angle of inclination of the handrail is fixed by means of toothed discs (Fig.7.4, Pos.1).
In order to enable an adjustment, a toothed disk is axially displaceable. To permanently ensure
that it can be moved, it must be lubricated every 20 operating hours.
The lubrication point (Fig.7.4, item 2) is located in the direction of travel on the left below the
control console.
7.6 Side adjustment of the hand rail
The handrail can be swiveled out of its normal position (middle position) by about 30˚ to the left
or to the right.
1. Pull up and hold the knob (Fig.7.5, item 1).
2. Swivel the handrail to the left or right to the desired position.
3. Release the knob (Fig.7.5, item 1) and move the handrail slightly to the left and right
until the locking pin engages.
1
Figure 7.5
