HyCut Mower
EN
2021-01-27
54 / 67
7.9
Cleaning the machine
When cleaning the HyCut mower, the following points must be observed.
Warning
Risk of injury / risk of environmental damage due to transmission of
electrical power during cleaning work!
Due to the transmission of electrical power during cleaning work, there is a risk of
injury, as well as danger for environmental and property damage (on the
machine)!
•
Wear personal protective equipment in the form of tight-fitting work clothes,
safety shoes, goggles and protective gloves.
•
Under no circumstances should high-pressure cleaners be used to clean
the mower
•
Clean the machine with running water (from the water hose without nozzle
attachment), brush and brush
•
The machine can also be cleaned outside closed rooms with the help of
compressed air. Appropriate protective clothing must be worn in the form of
protective goggles and, if necessary, a breathing mask. Care must be
taken to ensure that the dirt particles flying around do not injure anyone.
7.10 Measures after maintenance
Staff:
•
Private and commercial operators
After completion of the maintenance work and before turning on the machine,
perform the following steps:
1.
Check all previously loosened bolted connections for a fixed fit.
2. Verify that all previously removed protective devices and covers are properly
installed.
3. Ensure that all tools, materials, and other equipment used have been removed
from the workspace.
4. Clean the working area and remove any leaked substances such as .B liquids,
processing material or the like.
5. Ensure that all the machine's safety devices are working properly.
