Kersten B00002, Original Operating Manual

Page: 8 / 28

8
Safety instructions
3.2.7 Screw connections and tires
•
When working on the wheels, make sure the device is safely parked and secured against rolling
away!
•
Regularly check nuts and bolts for tightness and retighten if necessary.
•
Repair work on the tires must be carried out by qualified personnel and with appropriate mounting
tools!
•
If the tire pressure is too high, there is a risk of explosion!
•
Check the air pressure regularly!
3.2.8 Coupling and uncoupling of implements
•
Attach and remove attachments only when the engine is off, and the PTO is off.
•
When replacing attachments and their parts, use suitable tools and Wear gloves.
•
When mounting and dismounting, bring the required support equipment into the respective position
and ensure sufficient stability.
•
Secure the rear-mounted tow tractor with an attachment to prevent it from rolling (parking brake,
wheel chocks).
•
When attaching attachments, there is a risk of injury (crushing). Special care is necessary.
•
Attach implements according to regulations and fix in the prescribed places.
3.2.9 Maintenance, cleaning and repair work
•
Do not carry out maintenance and cleaning work on the running engine!
•
Always remove the spark plug connector when working on the engine.
•
If guards and working tools are subject to wear, they must be checked regularly and replaced if
necessary.
•
Damaged cutting tools must be replaced.
•
When replacing cutting tools, use suitable tools and wear protective gloves.
•
Only use original spare parts from the manufacturer, as these comply with the technical
requirements and thus the risk of accidents is minimized!
•
Cleaning with the high-pressure cleaner should be carried out so that the water jet is not held
directly in bearings, turned parts, grease nipples, shaft seals, wheel hubs, etc. After each
cleaning with the high-pressure device, the lubrication points must be re-greased. In the case of
infringement, the right to guarantee expires!
•
Check the moving parts for ease of movement and regrease if necessary!
•
After maintenance and cleaning work, be sure to replace the guards and put them in the
protective position!
•
To avoid the risk of fire, keep the machine clean!
•
Regularly check nuts and bolts for tightness and retighten if necessary.
•
When carrying out maintenance, cleaning and repair work on the lifted device, always make sure
that it is protected by suitable support elements!