benchmarkwireline.com
P. O. BOX 850
Fax: 281.342.4848
Phone: 281.342.6415
Simonton,Texas 77476
36220 FM 1093
June-2007
Rev D
Page 3 of 18
2.0
OPERATING
PROCEDURES
2.1
Turn the unit on by pressing the enable switch up. If external power is
applied, the unit will power on automatically.
2.2
Select the appropriate settings from the menu (see section 4.0)
2.3
Set the depth to the proper value by using the set depth switches or to
0 by pressing the zero switch. Note: the enable switch needs to be
pressed in order to set depth.
2.4
The system is now ready to measure depth.
2.5
After each run in the hole, reset the zero value before entering the
hole again.
