3
4
Warning
WEEE Marking
Catalogue number
Medical Device
CAUTION: Federal law restricts this device to sale by or
on the order of a dentist
Date of manufacture
CSA Mark with
“
C/US
”
Indicator for Certified Products
Temperature limit
Atmospheric pressure limitation
Keep dry
Refer to instruction manual
Caution
STEP-BY-STEP INSTRUCTIONS
PRECAUTION
The components and devices have not been disinfected or
sterilized prior to shipping. Please perform the necessary
cleaning and disinfection steps prior to patient treatment.
GETTING STARTED
Remove the device, file probes, AC/DC adapter, and power cord
from their packaging.
1
Charging the Battery
•
When using the device for the first time or after long-term
storage, charge the battery sufficiently before use.
•
After connecting the power cord and AC/DC adapter, plug
the AC/DC adapter into the charging terminal on the right
side of the device and plug the power cord into the power
supply. The battery icon appears on the display.
•
When charging is complete, the battery icon stops blinking
and stays on.
WARNING
• Charge using the AC/DC adapter and power cord included in
the package.
• Be sure to connect the power plug to a grounded power supply.
PRECAUTION
This device is designed to not operate while charging. To use the
device, disconnect the AC/DC adapter from the device.
INITIAL SET-UP
1
Assembling the Device
a. Attach the lip hook and file holder to the probe cord, and
then connect it to the body.
b. Insert the USB connector (H) of the probe cord into file
holder B and insert the lip hook into the lip hook connector.
Or connect holder A using the holder Adapter
c. Plug the USB connector (A) of the probe cord into the Apex
Connect unit USB connector.
PRECAUTIONS
• The USB connector (Type C) on the probe cord has its intended use.
Examine each connector and connect to the appropriate device.
• Single USB connector (A): connects to the Apex Connect unit
• USB connector (H) connects to the file holder
2
Disassembling the Device
1. Pull the lip hook from the lip hook connector on the probe
cord to remove.
2. Pull out the USB connector at both ends of the probe cord
from the Apex Connect Unit and file holder B.
