Kero-Sun LC-54, Instruction Manual

Page: 14 / 37

12
ENGLISH
EMERGENCY MESSAGE
In the event that heater should extinguish itself, without any action or your part, you
should look to the digital indicator for any of the following messages.
MESSAGE
(Digital Indicator)
MESSAGE MEANING
Temperature within the heater too high.
Power interrupted. You can re-ignite the heater.
Thermostat is broken or disconnected. Contact your dealer.
Faulty burner thermistor. Contact your dealer.
You have accidentaly activated your safety tip-over switch. You should reset
this device as described, press the “OFF” button and restart your heater.
lter
lter.
Room temperature above 32°C
Failure of blower motor.
lter dirty; or Fuel pump dirty.
The heater has been in operation continuously for a
automatically. Switch the heater back on.
(& blinking FUEL-indicator)
ll removable fuel tank.
(& blinking VENT-indicator)
Too little ventilation. Ventilate better.
50
MESSAGE
(Digital Indicator)
MESSAGE MEAING WHAT TO DO
Temperature within the heater too high. Cool-down and re-ignite.
Power interrupted. You can re-ignite the heater.
Thermostat is broken or disconnected. Contact your dealer.
Faulty burner thermistor. Contact your dealer.
Primary flame rod is malfunctioning
and / or dirty.
Contact your dealer.
You have accidentally activated your
safety tip-over switch.
You should reset this device as
described, press the ‘’OFF’’ button and
restart your heater.
Burner flame has been extinguished
during operation . Check to see if air filter is clogged with
dust. If so, clean air filter.
Room temperature above 32°C. Re-ignite the heater.
Failure of blower motor. Contact your dealer.
Air filter dirty; or Fuel pump dirty. Clean filter. / Contact your dealer.
The heater has been in operation
continuously for a period of 50 hours
and has turned itself off automatically.
Switch the heater
Out of fuel. Refill removable tank.
Too little ventilation. Ventilate better.
14