Kerning THM GOTHIC, Operating Manual

Page: 26 / 50

26
3.5 Job Selection Routine
A. Control panel displays JOB X SELECTED where X is a from 1-5.
B. To select a new job pressing ENTER will display SELECT JOB: choose
a job from 1-5 and ENTER. The display will respond with JOB #
SELECTED .
C. To remain with the current job press CLEAR and return to the Program
mode menu.
3.6 Form Length Routine
A. The FORM LENGTH X displays the current number of lines per form.
B. To change the value, press ENTER and the display reads CHANGE TO:
##. Use the number keys to configure a value from 1 to 255 followed by
the ENTER key.
C. The display responds with CHANGED TO Y and returns to the Program
mode with FORM LENGTH Y displayed.
D. To return to the Program mode menu without changes press the CLEAR
key.