Kerning THM GOTHIC, Operating Manual, Page: 2 / 50

2
All rights reserved. No part of this document shall be published
or reproduced in whole or in part except with written permission
of Kerning Data Systems, Inc.
The material in this document is for information purposes and
is subject to change without notice.
Communications Warning Notices
Federal Communications Commission (FCC) Statement: This equipment has been
tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at
his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC
emission limits. Kerning Data Systems Inc. is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or by
unauthorized changes or modifications to his equipment. Unauthorized changes or
modifications could void the user's authority to operate the equipment.
European Union (EC) Electromagnetic Compatibility Directives: This product is in
conformity with the protection requirements of EC Council Directive 89/336/EEC on the
approximation of the laws of the Member States relating to electromagnetic compatibility:
EN 50081-1 – General emission standard for Residential and Commercial environments
Limits and Method of Measurement of Radio Interference Characteristics Information
Technology Equipment by conduction and radiation, and EN 50082-1 – Generic Immunity
Standard of Residential, Commercial, and Light Industrial Products. Kerning Data Systems
Inc. cannot accept responsibility for any failure to satisfy the protection requirements
resulting from a non-recommended modification of the product.
Properly shielded and grounded cables and connectors must be used on order to reduce
the potential for causing interference to radio and television communication and to other
electrical or electronic equipment.