Kerning THM GOTHIC, Operating Manual, Page: 19 / 50

19
III. OPERATOR CONTROLS AND ADJUSTMENTS
3.1 Control Panel Operation
A. The operator's control panel is made up of a 23 button keypad, a 16 column
alphanumeric display, and two LED indicators. The keypad directs printer
operation with multilevel menu driven routines.
Below is a description of the use of the keypad:
Key Function
0-9 Used for numeric entries.
PROG Used to select the program mode. Displays PROGRAM
MODE .
LF Used to increment the paper feed system one line while in the
offline mode. Displays LINE FEED .
FF Used to increment the paper feed system to the next top of
form while in the offline mode. Displays FORM FEED .
RESET Selects the initialize printer routine, clearing all the registers
and faults; and resetting the hammer protect relay. Displays
<ENTER> TO RESET . Nonvolatile memory is not affected.
Up Arrow Offline mode: NEXT key toggles paper increment between
EXTRAFINE ADJUST (.041"); FINE ADJUST (.205") and
COARSE ADJUST (10.65"); displays ADJUST PAPER UP .
Tractor Adjust mode: Provides paper tensioning.
Test Print mode: 10.65" scroll forward.
Hammer Flight Time mode: increments hammer column
number selected by 10 columns.
Down Arrow Offline mode: Paper decrement EXTRAFINE ADJUST
(.041") and FINE ADJUST (.205"); displays ADJUST PAPER
DOWN. COARSE ADJUST not available in reverse.
Test Print mode: Not available.
Hammer Flight Time mode: decrements hammer column
selected by 10 columns.