Kernau KFUF 14152 NF W, User Manual

Page: 43 / 92

43
CHAPTER 8. TIPS FOR SAVING ENERGY
1. Install the appliance in a cool, wellventilated room, but not in direct sunlight and not near a heat
source (such as a radiator or oven) otherwise an insulating plate should be used.
2. Allow warm food and drinks to cool before placing them inside the appliance.
3. Place thawing food in the refrigerator compartment if available. The low temperature of the
frozen food will help cool the refrigerator compartment while the food is thawing. This will
save energy. Frozen food left to thaw outside of the appliance will result in a waste of energy.
4. Drinks or other liquids should be covered when inside the appliance. If left uncovered, the
humidity inside the appliance will increase, therefore the appliance uses more energy. Keeping
drinks and other liquids covered helps preserve their smell and taste.
5. Avoid keeping the doors open for long periods and opening the doors too frequently as warm air
will enter the appliance and cause the compressor to switch on unnecessarily often.
6. Keep the covers of the different temperature compartments (such as the crisper and chiller if
available) closed.
7. The door gasket must be clean and pliable. In case of wear, replace the gasket.
CHAPTER 9. TECHNICAL DATA
The technical information is situated in the rating plate on the internal side of the appliance and on the
energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related
to the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this
appliance. It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu
and the model name and product number that you find on the rating plate , the appliance.
See the link www.theenergylabel.eu for detailed information about the energy label.
CHAPTER 10. INFORMATION FOR TEST INSTITUTES
Appliance for any EcoDesign verification shall be compliant with EN 62552. Ventilation requirements, recess
dimensions and minimum rear clearances shall be as stated in this User Manual at Chapter 2. Please contact
the manufacturer for any other further information, including loading plans.
CHAPTER 11. CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, Serial Number and Service Index.
The information can be found on the rating plate. You can find the rating label inside the fridge zone on
the left lower side.The original spare parts for some specific components are available for a minimum of 7
or 10 years, based on the type of component, from the placing on the market of the last unit of the model.
Visit our website to:
WWW.KERNAU.COM