•
set the function selector knob and the temperature selector knob to
your preferred
settings,
•
Touch MENU repeatedly until the display shows
dur
(duration)
briefly and the
symbol
will be flashing
,
•
set the desired duration from 1 minute to 10 hours using the
<
/
>
sensors.
The set duration will be memorised after about 7 seconds. The display will show the
current time and the
symbol. Once the duration time has elapsed the oven
will turn off automatically. You will hear an alarm and the
and
symbols will be
flashing.
A
utomatic operation:
If you wish your oven to work for a certain period and shut down at set time, you need to:
In order to set the appliance to switch off at a specific time after a set Duration has
elapsed, set the Duration and the End Time:
•
Touch MENU repeatedly until the display shows
dur
(duration) briefly
and the
symbol
will be flashing,
•
set the desired duration from 1 minute to 10 hours using the
<
/
>
sensors,
•
Touch MENU repeatedly until the display shows
End
briefly and the
symbol
will
be flashing,
•
set the End Time using the
<
/
>
sensors, a maximum of 23 hours and
59
minutes
ahead
,
•
set the function selector knob and the temperature selector knob to
preferred settings.
The
and
functions are now active. The
appliance will switch on at End Time
minus Duration (i.e. if the set
Duration is 1 hour and the set End Time is 14:00, the
appliance will
automatically switch on at 13:00).
Once the Duration time has elapsed the oven will turn off automatically. You will
hear an alarm and the and will be flashing,
•
•
Set the oven function selector knob and the temperature selector knob
in off
position.,
Touch and hold
<
/
>
or MENU to mute the alarm. The and
will be off
and the display will show the current time after
approximately 7 seconds.
Change the beep tone
You can change the beep tones as follows:
•
Simultaneously touch the - / + sensors.
•
Touch MENU repeatedly to select the ton (tone). The display will be flashing ton 1.
•
Use the - / + sensors to select your preferred tone: Use + to select the setting 1 to 3
Use - to select the setting 3 to 1.
EN
41
