Before you first use your appliance:
•
Remove packaging, clean interior from any residual preservation substances.
•
Remove any accessories and wash them in warm water with detergent.
•
Turn on ventilation or open a window.
•
Turn the function knob into top+bottom or ring fan function (see: Function selector
and oven control).
•
Perform an initial burn in (250°C, 30 minutes), remove any dirt and clean thorothoroughly.
ATTENTION:
Remove security tape from telescopic runners before burn in.
Knobs are “hidden” inside of the control panel. To select a function, you should:
1.
Gently push the knob and let it free.
2.
Select desired function by turning the knob.
Programs are indicated on the knob.
ATTENTION:
If the oven is equipped with electronic timer, it will display flashing 0:00 time after firstly plugging it in.
Current time should be programmed (see- Timer instruction manual attached to this document). Oven
will not operate without the time set.
IMPORTANT :
Electronic timer is equipped with touch sensors which are operated by touching marked places on the
control panel. Every registered touch is indicated by a sound. Sensor surfaces should be kept clean.
IMPORTANT :
Oven cavity should be cleaned only with warm water with washing-up liquid.
CHAPTER 5. USAGE
1
2
EN
39
