Kernau KBO 0946 PT B, Instructions For Use Manual

Page: 38 / 96

38
ELECTRICAL SAFETY
1. Plug the appliance in a grounded socket protected by a fuse conforming to the values specified
in the technical specifications chart.
2. Have an authorized electrician set grounding equipment. Our company shall not be responsible
for the damages that shall be incurred due to using the product without grounding according
to local regulations.
3. The circuit breaker switches of the oven shall be placed so that end user can reach them when
the oven is installed.
4. The power supply cord (the cord with plug) shall not contact the hot parts of the appliance.
5. If the power supply cord (the cord with plug) is damaged, this cord shall be replaced by the
manufacturer or its service agent or an equally qualified personnel to prevent a hazardous
situation.
6. Never wash the appliance by spraying or pouring water on it. There is a risk of electrocution.
WARNING
To avoid electric shock, ensure that thedevice circuit is open before changing the lamp.
WARNING
Cut off all supply circuit connections before accessing the terminals.
7. Do not use cut or damaged cords or extension cords other than the original cord.
8. Make sure that there is no liquid or humidity in the outlet where the product plug is installed.
9. The rear surface of the oven also heats up when the oven is operated. Electrical connections
shall not touch the rear surface, otherwise the connections may be damaged.
10. Do not tighten the connecting cables to the oven door and do not run them over hot surfaces. If
the cord melts, this may cause the oven to short circuit and even a fire.
11. Unplug the unit during installation, maintenance, cleaning and repair.
12. If the power supply cable is damaged, it must be replaced by its manufacturer or authorized
technical service or any other personnel qualified at the same level, in order to avoid any
dangerous situation.
13. Make sure the plug is inserted firmly into wall socket to avoid sparks.
14. Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.
15. An omnipolar switch capable to disconnect power supply is required for installation.
Disconnection from power supply shall be provided with a switch or an integrated fuse
installed on fixed power supply according to building code.
16. Appliance is equipped with a type ‘’Y’’ cord cable.
17. Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For
appliances with over voltage category below III, disconnection device shall be connected to
fixed power supply according to wiring code.
INTENDED USE
1. This product has been designed for domestic use. Commercial use is not permitted.
2. This appliance may only be used for cooking purposes. It shall not be used for other purposes
like heating a room.
3. This appliance shall not be used to heat plates under the grill, drying clothes or towels by
hanging them on the handle or for heating purposes.
4. The manufacturer assumes no responsibility for any damage due to misuse or mishandling.
5. Oven part of the unit may be used for thawing, roasting, frying and grilling food.
6. Operational life of the product you have purchased is 10 years. This is the period for which the
spare parts required for the operation of this product as defined is provided by the manufacturer.