Kernau KBO 0946 PT B, Instructions For Use Manual

Page: 52 / 96

52
POWER ON
After the connection to the power supply system, the oven is off, and the indicator of hour is flashing. The
hour is incorrect and shall be set to current time. Press regulation indicator to turn on the oven and set the
time as decribed below:
TIME CONTROL BUTTON
The adjusting of time is possible when the oven is not in use. Press simultaneously b and – for 3
seconds to enter to the regulating mode, the indicator dot between the hour and minutes will blink. Use +
or – buttons, to set the desired time of cooking. The maximum cooking time is 23 hours and 59 minutes. The
regulation mode will be exited in 6 seconds after the last press or immediately after pressing the regulation
button.
ATTENTION
The time regulation mode is turned on, just after the appliance is connected to the main power
supply.
SETTING THE TIMER
This function allows to set the time in minutes. After the setted time is pasted, there will be a tone signal.
Press once the regulation button to enter to the timer regulation mode, the indicator of sandglass will blink
on the display. Use the + or – to set the desired time. The maximum length is 10 hours. The regulation mode
will be exited in 6 seconds from last press or immediately after pressing the regulation button.
TURNING OFF THE SOUND SIGNAL
After the ending of setted timer time, there will be sound signal and on the display will blink the indicator
of sandglass. Pressing any button will turn off the sound signal and put out the sandglass indicator. If any
of the buttons will be not pressed, the sound signal will be automatically turned off after 5 minutes, but the
indicator of sandglass will be still blinking.
SEMI-AUTOMATIC COOKING
This function is intended to immediately runing the cooking for certain time. When the oven is setted on
desired function and the temperature is also setted, follow belows instuction to turn on the semi-automatic
cooking:
1. Press regulation button and then press twice A button, the symbol „dur” will flash on the screen
and the cooking length will be displayed, one after the other.
2. Use + or – to set the desired cooking length.
3. After 6 seconds from last press or after twice pressed A button the regulation mode will be
ended. The regulation indicator will flash on a the screen and the current time will be displayed.
FULL-AUTOMATIC COOKING
This cooking program is intended to delayed start of cooking process, in a way that dish shall be ready at
certain hour. In other words, the oven will start cooking not immediately, but will automatically calculate
the time to start cooking.
1. Follow the 1st and 2nd step from semi-automatic function, as decribed above.
2. Press regulation indicator, an A symbol will blink on screen and the cooking length will be