
PNJ_PNS-BA-e-1612
43
Use the
SET
key to confirm.
At every reference optimisation, the reference weight is
calculated anew. As the additional pieces increase the
base for the calculation, the reference also becomes
more exact.
For further reference optimisation place more counted
pieces (approx. 1/2 to 1/5 of the counted material).
Execution see step 5.
7. How to save the reference
Press the
-key to save the reference whereupon
the weighing scale automatically calculates an average
weight per part.
Remove reference weight. The balance is now in parts
counting mode and counts all units on the weighing
pan.
8. Count the items
Place load on pan and read the number of pieces.
Sample protocol
(KERN YKB-01N)
9. Printing
The display value will be printed out by connecting an
optional printer and pressing the
-key (factory
setting).
+0000125 PC S
Display Description
ADD
The number of pieces placed is too small for a correct reference
calculation.
Either you accept the error and confirm by pressing the
-
key or you add additional items.
L-ERR
Piece below minimum weight of piece (see
chap. 1
“Technical
specifications“):
To interrupt a reference calculation, press the
-key.
The reference weight will remain stored even after the weighing balance was
turned off until the reference is reset.