73
PBS/PBJ-BA-e-1314
(v) Reading commands for set values
TARGET
Readout of the set target value.
LIMIT
Readout of the set limit value.
G.LO
Readout of the set lower limit value on the display of the check weighing
1.
G.UP
Readout of the set upper limit value on the display of the check
weighing 1.
L.LO
Readout of the set lower limit value on the display of the check weighing
2.
L.UP
Readout of the set upper limit value on the display of the check
weighing 2.
UW
Readout of the set value for weight unit.
G/PCS
Corresponds to the „g/PCS” button.
CALWIT
Readout of the set external weight value for calibration of measuring
range.
ACALT1
Readout of time 1 in the Clock-CAL mode.
ACALT2
Readout of time 2 in the Clock-CAL mode.
ACALT3
Readout of time 3 in the Clock-CAL mode.
P.TARE
Readout of the set initial taring value.
ZRNG
Readout of the set zero range value.
USER
Readout of conversion factors for the user unit.
VOL
Readout of the set value for reference weight.
DENSE
Readout of the set value for ambient liquid density.
ITIME
Readout of the set value for interval timer.
(vi) Commands for setting numerical values
CALWIT=
Sets external weight value for calibration of measuring range.
ACALT1=
Sets time 1 in the Clock-CAL mode.
ACALT2=
Sets time 2 in the Clock-CAL mode.
ACALT3=
Sets time 3 in the Clock-CAL mode.
UW=
Sets weight unit.
VOL=
Sets volume of reference weight.
SDENSE=
Sets density of ambient liquid.
DATE=
Sets date.
TIME=
Sets time.
TARGET=
Sets target value.
LIMIT
Sets limit value.
G.LO=
Sets lower limit value on the display of the check weighing 1.
G.UP=
Sets upper limit value on the display of the check weighing 1.
L.LO=
Sets lower limit value on the display of the check weighing 2.
L.UP=
Sets upper limit value on the display of the check weighing 2.
PCS=
Sets any number of pieces.
#=
Corresponds to numeric buttons of the keyboard.
ID=
Specifies ID.
