23
OKO-1-BA-en-2111
6 Lamp replacement
The devices of the OKO-1 series are equipped with LEDs.
Due to the long service life of LED illumination, regular lamp replacement will not be
necessary with these microscopes.
Problems with the lighting would therefore in most cases have defects in the electrical
system as the cause. In such a case, our technical service can help.
7 Fuse replacement
The fuse housing is located on the rear of the microscope below the power plug
connection. When the instrument is switched off and the mains plug is removed, the
housing can be pulled out. It is advisable to use a screwdriver or similar to help here.
The defective fuse can now be removed from its housing and replaced with a new one.
Then reinsert the fuse housing into the insertion point below the mains plug connection.
