KERN KMF-TM, Operating And Installation Instructions

Page: 70 / 147

20 KMF-TM-BA_IA-e-1310
11 Instant help
In case of a fault in the program sequence, the balance should be shortly switched
off. The weighing process must then be restarted from the beginning.
Failure: Possible causes:
The displayed weight
does not glow.

The display unit is not switched on.

The mains supply connection has been interrupted
(mains cable not plugged in/faulty).

Power supply interrupted.

Rechargeable battery inserted incorrectly or empty.

No rechargeable battery inserted.
The displayed weight is
permanently changing

Draught/air movement

Table/floor vibrations

The load cell has contact with foreign objects

Electromagnetic fields / static charging (choose
different location/switch off interfering device if
possible)
The weighing result is
obviously incorrect

The display of the balance is not at zero.

Adjustment is no longer correct.

Great fluctuations in temperature.

The weighing system is not on even surface.

Electromagnetic fields / static charging (choose
different location/switch off interfering device if
possible)
Should other error messages occur, switch balance off and then on again. If the
error message remains inform manufacturer.