KERN KIB-TM, Manual

Page: 31 / 69

KIB-TM-ZB-e-1710 7
1.4 KERN Communications Protocol (KERN Interface Protocol)
KCP (KERN communication protocol) contains the commands that are used to
control the KERN balances via the interface.
•
Finish commands with CR/LF character.
•
Consult the KCP manual for more information, available on
our KERN website ( www.kern-sohn.com ).
The following commands are supported:
@ Cancel
I0 List all implemented KCP commands
I1 Query KCP level and KCP versions
I2 Query device information (type, capacity)
I3 Query device software version
I4 Query serial number
I4
˽
A
˽
“xxxxxxxx“ Set serial number (default value is K123456)
I5 Query SW-Identification number
S Send stable weight value
SI Send weight value immediately
SIR Send weight value immediately and repeat
Z Zero
ZI Zero immediately
D Display: Write text to display
D
˽
“
˽
“ Clear Display (after D-Command)
K Keys: Set configuration
SR Send weight value on weight change (send and repeat)
T Tare
MM Query/preset tare weight value
TAC Clear tare value
TI Tare immediately