12
KIB-TM-ZB-e-1710
3 Ethernet (optional)
The Ethernet allows you to transmit data via cable to devices (such as computers,
printers etc.) that are interconnected in a local network. No direct connection between
KIB-TM and PC is necessary.
Set the following menu items in
KIB-TM
(See chap. 8)
Menu item "
P9 Prt
"
"
oPt
"
"
intF
"
"
EnEt
" (Enable output Ethernet)
Menu item "
P9 Prt
"
"
oPt
"
"
ModE
"
"
Count
" (Output mode cont. data
output)
Menu item "
P9Prt
"
"
oPt
"
"
iP1-4
" Set IP address KIB-TM as follows:
Enter IP address not yet allocated in network:
Example:
10.0.1.104
It is always necessary to enter three numbers following scheme below:
10.
0.
1
104
IP-address
010
000
001
104
Entry sequence in KIB-TM
IP1
IP2
IP3
IP4
The same principle is used to configure the following settings:
Menu item "
P9 Prt
"
"
oPt
"
"
MASK_1-4
" (Subnet mask)
Menu item "
P9 Prt
"
"
oPt
"
"
GATE_1-4
" (Gateway)
Now enter the IP address for the PC on the display unit
(If unknown proceed as follows:
Press Windows key and "R" simultaneously
Enter "cmd" and press Enter to confirm
The entry prompt will appear
Enter "ipconfig" and press Enter to confirm
The PC‘s IP address will appear on the screen)
