14
KFE-TNM-BA_IA-e-1610
Procedure
Confirm menu setting
by
.
Ensure that there are no objects on the weighing plate.
Wait for stability display, then press
.
The currently set adjustment weight will be displayed.
Either use the displayed adjustment weight or change it with
,
and
(numerical input see chapter 2.1.1), the
active digit is flashing.
Confirm by
, „LoAd“ will be shown.
Carefully place adjusting weight in the centre of the weighing
plate. Wait for stability display, then press
.
After the adjustment the balance will carry out a self-test.
Remove adjusting weight
during
selftest, balance will return
into weighing mode automatically.
An adjusting error or incorrect adjusting weight will be
indicated by the error message; repeat adjustment
procedure.
Summary of Contents for KFE-TNM
Page 39: ......
