KFE-TNM-BA_IA-e-1610
21
3. How to set tolerance weighing mode
Press
repeatedly until
is displayed.
Acknowledge with
.
Press
repeatedly until
BEEP
is displayed.
Press
and current setting will be displayed.
Select desired setting (bp 1, bp 2, bp 3) with
and
confirm by pressing
.
Press
repeatedly to exit menu. The weighing system is
in tolerance weighing mode, i.e. from here occurs the
graduation if the weighed material is within the two tolerance
limits.
4. Weighing with tolerance range
Tare when using a weighing container
Put on goods to be weighed, tolerance control is started
Load below specified
tolerance
Load within specified
tolerance
Load exceeds specified
tolerance
The indicator [LO] is
displayed
The indicator [OK] is
displayed
The indicator [HI] is
displayed
•
The tolerance control is not active when the weight is under 20d.
•
To delete limits, enter “00.000 kg“.
Summary of Contents for KFE-TNM
Page 39: ......
