7
OIV-2-SW-BA-e-2010
3.3.5.1 Photo (snapshot) Settings
1) The default naming of the camera images is "IMG", the total number of images taken
when the camera is started is "N" - 1. The images are automatically stored in a folder named
"img". An external memory (recommended USB 3.0 stick) must be installed to store images.
The USB 3.0 port only supports FAT32 format. After attaching the USB stick, the icon
appears in the lower left corner of the user interface.
2) The naming of the pictures can be changed. Under the menu "Shooting Settings" the
automatic naming can be changed to "Manual". The item "Manual" must be activated for this.
If a photo is now taken, the request to name it appears.
3) "Safe Graphics" to save drawings and measurements with the image must be
"Safe Graphics" - "Yes" must be activated. If these are not to be deposited with the image,
then "No" must be activated.
3.3.5.2 Measurement Setup (Settings)
"Edge findig range": The value of the range in which the measuring point moves for
automatic edge finding (see 3.3.8).
Width of the measuring line: The width can be set under "Line".
Font size: The font size can be changed under "Font".
Colour of the elements: After adjusting the colour under the item "Graphics", the setup can
be closed. The changes are then applied to new elements.
Font colour: After adjusting the colour under the item "Font", the setup can be closed. The
changes are then applied.
Calibration colour (scales): After adjusting the colour under the item "Scale", the setup can
be closed. The changes are then applied.
Display of the calibration: Under the item "Scale" the current scale can be shown or hidden.
3.3.5.3 Restore factory settings
To reset the unit to factory settings, click on the "Restore" button.
3.3.5.4 Languages
The languages English and Chinese (traditional / simplified) are supported.
