16
1. Safety regulations
1.1 General information
installation, operation and maintenance. All persons working on and with the clipper must read the operating instructions. The operating
instructions must be permanently available at the machine usage site.
1.2 Photo references
This symbol with the picture number refers to the appropriate picture
on the operating instructions flap.
1.3 Fundamental safety instructions
Observe the legal regulations on regular examinations. Also observe the industrial safety regulations.
1.3.1 Power supply
Only insert the plug into correctly installed sockets. Defective electrical installations can cause an electric shock or a short-circuit. Sockets should
be equipped with an earth leakage circuit breaker (FI). Observe your local pertinent regulations. Only carry out maintenance and cleaning tasks
after pulling the plug. Never leave the machine unsupervised when plugged in. Clipping animals is only permissible, if children are kept away
from the clipping location. Do not store your machine in reach of children!
1.3.2 Maintenance and service obligation
Never use a damaged machine for clipping. Only allow authorised technical personnel to repair the housing or defective electrical cable.
1.3.3 Radiation
The clipper examination complies with the fundamental protection requirements according to the harmonised European standards of the EEC
Directive.
1.3.4 Remaining risks
Please notify us of operational dangers and risks, which do not occur when directly trimming the animals. This also applies to endangering
technical defects.
1.4 User requirements
Observe and comply with the instructions in this manual to ensure safe use of the clipper.
• The user has read and understood the operating instructions or an expert has explained the operation and pointed out the risks.
• The user is experienced in clipping animals. Children and frail persons (without supervision) should not use the clipper.
2. Designated use
2.1 Intended purpose
The clipper is exclusively intended for clipping cattle, horses or large dogs. Any other use, in particular on humans, is explicitly prohibited.
2.2 Technical data
Type designation:
Animal shearing maching 65W
Supply voltage:
230 V AC
Motor rating:
65 W
Frequency:
50 Hz
Dimensions (W/H/L):
7.8 x 5.5 x 24 cm
Weight without cable:
690 g
Sound pressure level:
82 dB (A)
Strokes:
2400/ min
Protection class:
II
Operating conditions
Max. ambient temperature:
0 – 40°C
Max. air humidity:
10 – 90 % (relative)
2.3 Equipment
1 clipper with clipper head, 1 set of shear blades (mounted), 1 bottle of oil SÄE 30 HD (100 ml), 1 cleaning brush, 1 operating manual and
1 storage case
