RA55 032615
3
requires a daisy chain configuration only; other configurations (e.g., star) are not supported by
Kepco.
FIGURE 3. CONTROLLER TO POWER MODULE INTERFACE
TABLE 1. ACCESSORIES
ITEM
PART NO.
QUANTITY
SUPPLIED
Connector Shell **
Kepco - 142-0372
(Positronic Industries - PLB06M0050)
9
Contact, 12 Gauge **
Kepco - 107-0327
(Positronic Industries - MS112N)
60
Cable (BIT bus, 2m long, two 9-pin DSUB connectors, Kepco
P/N 142-0225)
Kepco - 118-0844
1
Cable (BIT bus, 2m long, one 9-pin DSUB connector, Kepco P/N
142-0225, one 5-pin DIN connector, Kepco P/N 142-0308)
Kepco - 118-0749
(Not supplied)
Cable (BIT bus, 2m long, two 5-pin DIN connectors, Kepco P/N
142-0308)
Kepco - 118-0699
(Not supplied)
Terminator, IEEE1118 Control Bus
Kepco - 195-0086
(Not supplied)
Chassis Slide
Kepco 108-0249 (Jonathan 110-QD-18-2)
(Not supplied)
Filler Panel - 1 slot
Kepco - RFP 55-1
(Not supplied)
Filler Panel - 4 slots
Kepco - RFP 55-4
(Not supplied)
Cover (AC input, J10, J11)
Kepco - 128-1854
(Not supplied)
North American Linecord Set (115 V a-c, 15A max, NEMA 5-15P
plug, 6 feet long)
Kepco - 118-0506
(Not supplied)
** Contacts to be assembled into connector shell per Figure 6; six extra contacts are provided.
