KEPCO ABC 10-10DM, Operator'S Manual

Page: 89 / 96

ABC 040104
B-19
B.79
SYSTem:COMMunication:GPIB:ADDRess?
QUERY
SYST:COMM:GPIB:ADDR?
Syntax : Short Form: SYST:COMM:GPIB:ADDR?
Long Form: SYSTem:COMMunication:GPIB:ADDRess?
Return Value: <int_value> 0 to 30
Description: Identifies selected power supply GPIB address.
B.80
SYSTem:COMMunication:SERial:BAUDrate
COMMAND
SYST:COMM:SER:BAUD
Syntax : Short Form: SYST:COMM:SER:BAUD {19200 | 9600 | 4800 | 2400}
Long Form: SYSTem:COMMunication:SERial:BAUDrate {19200 | 9600 | 4800 | 2400}
Description: Sets the unit to operate at the specified baud rate.
B.81
SYSTem:COMMunication:SERial:BAUD?
QUERY
SYST:COMM:SER:BAUD?
Syntax : Short Form: SYST:COMM:SER:BAUD?
Long Form: SYSTem:COMMunication:SERial:BAUD?
Return Value: <int_value> {19200 | 9600 | 4800 | 2400}
Description: Returns operating baud rate.
B.82
SYSTem:COMMunication:SERial:ECHO
COMMAND
SYST:COMM:SER:ECHO
Syntax : Short Form: SYST:COMM:SER:ECHO {ON | OFF}
Long Form: SYSTem:COMMunication:SERial:ECHO {ON | OFF}
Description: Enables (ON) or disables (OFF) echo mode (see PAR. 3.6.3.1) Sending ON causes all subsequent
characters to be echoed back. Sending OFF turns off the character echo after the nest line terminator
character. The *RST command has no effect on echo status
B.83
SYSTem:COMMunication:SERial:ECHO?
QUERY
SYST:COMM:SER:ECHO?
Syntax : Short Form: SYST:COMM:SER:ECHO?
Long Form: SYSTem:COMMunication:SERial:ECHO?
Return Value: {ON | OFF}
Description: Identifies whether echo mode is active (ON) or disabled (OFF) (see PAR. 3.6.3.1).
B.84
SYSTem:COMMunication:SERial:PACE
COMMAND
SYST:COMM:SER:PACE
Syntax : Short Form: SYST:COMM:SER:PACE {NONE | XON}
Long Form: SYSTem:COMMunication:SERial:PACE {NONE | XON}
Description: Enables (XON) or disables (NONE) data flow control via the serial interface (see PAR. 3.6.3.3)
B.85
SYSTem:COMMunication:SERial:PACE?
QUERY
SYST:COMM:SER:PACE?
Syntax : Short Form: SYST:COMM:SER:PACE {NONE | XON}
Long Form: SYSTem:COMMunication:SERial:PACE {NONE | XON}
Return Value: {XON | NONE}
Description: Identifies whether data flow control via the serial interface is enabled (XON) or disabled
(NONE)
(see PAR. 3.6.3.3).
B.86
SYSTem:COMMunication:SERial:PROMpt
COMMAND
SYST:COMM:SER:PROM
Syntax : Short Form: SYST:COMM:SER:PROM {ON | OFF}
Long Form: SYSTem:COMMunication:SERial:PROMpt {ON | OFF}
Description: Enables (ON) or disables (OFF) prompt (see PAR. 3.6.3.2). Sending ON causes the unit to return >
character after the command is parsed.