KharkovEnergoPribor Ltd. | KEP Ltd.
+380 57 393 1069
www.kep.ua | [email protected]
10
USER MANUAL
If you want to charge the battery, connect a power supply unit plug
(included in the delivery set) to the corresponding jack of the Tracer.
Plug the power supply in. Full battery is shown with completely
highlighted BATTERY bar graph indicator.
Charging time is from 6 to 8 hours. If the Tracer is out of use for a
long time, recharge the batteries quarterly.
Note.
Charging of standard battery is with the current from 400mA to
500mA. When charging the batteries with other rated capacity, always
check the temperature. If it rises quickly, stop charging.
4.3 Selection and setting the main parameters via the MENU options
Press the "MENU" button to enter or exit the menu. The menu is
navigated with the signal gain buttons or sound volume buttons. The
options may be selected and changed with the
«H» button.
4.3.1
In the INDICATION submenu (see Figure 3b)
the TRACE option (see Figure 3c) is used to select the signal peak
type (see Figure 3d) and to switch on/off the peak or null
indication;
the SONDE option (see Figure 3e) is used to expand the scale 1:4
and to select signal level at the of the SONDE jack input in dB or
Volts.
4.3.2
In the SOUND submenu (see Figure 3f) you may select an auditory
accompaniment of the indication:
as a single-frequency tone when the volume is proportional to the
signal level;
as a crack sound like in GM counter when the frequency of cracks
is proportional to the signal level;
as a direct audible signal from antenna on the frequencies of
«50 Hz» and «AIR». This function provides operation by ear.
In the TRACE mode the sound backs up the peak signal intensity.
When Peak mode is OFF, the sound level corresponds to the null
signal. In the TRACE-SONDE mode, the sound backs up the signal
at the SONDE jack input.