KEP MMI-200 Series Operating And Installation Instructions Download Page 7 | Manualshive

Page: 7 / 33

background image

Page 4

1.0 Getting Started

1.1 What is the MMI-2XX Series?

MMI-2XX Series

MMI Units are operator interfaces for PLCs. They allow the
operator to interact with the machine by displaying messages
that are preloaded into them with a Personal Computer and/or
turning on LED's. They have legendable keys which can be
programmed to perform various functions for the operator.

Equipment

Checklist

An MMI

system should include:

• An MMI-2XX Series base unit.

• An interface cable to the programmable controller.

• A personal computer with MMI programming
software. A PC to MMI cable is required.

• View machine status and
parameters.

• Change machine status or
applicable operating param-
eters of the machine.

• Maintain the running of the
machine.

Designed
For Use

Provides a convenient way
for a machine operator to:

It also gives enhanced
capabilities to the machine
through:

• RS232 ASCII output.

• Direct keypad interface.

• Visually displayed
prompts.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
5
6
7
8
9
...
»

Summary of Contents for MMI-200 Series


































Reviews:

No comments

Related manuals for MMI-200 Series

Brand: Rangevision Pages: 31

Brand: MacDon Pages: 272

Brand: MacDon Pages: 70

Brand: ParaBody Pages: 5

Brand: RayLight Pages: 34

GAZELLE FREESTYLE

Brand: Gazelle Pages: 10

Brand: Latham Pages: 19

Brand: HABYS Pages: 16

Brand: Pari Pages: 12

Brand: laerdal Pages: 2

Brand: laerdal Pages: 104

Brand: laerdal Pages: 33

Brand: Lafayette Pages: 2

Brand: IKEA Pages: 24

Brand: ICS Pages: 156

Brand: ABB Pages: 112

Brand: ABB Pages: 154

Brand: RAB Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands