Page 3
About this Manual
This document is based on information available at the time of its publi-
cation. While efforts have been made to be accurate, the information in
this document may not cover all details or variations in hardware or
software, nor does it provide for every possibility in connection with
installation, operation, or maintenance. Features may be described
herein which are not present in all hardware. Kessler Ellis Products
assumes no obligation of notice to holders of this document with respect
to changes subsequently made.
Information in this document is subject to change without notice and does
not represent a commitment on the part of Kessler Ellis Products.
Some common terms used:
PLC
:
P
rogrammable
L
ogic
C
ontroller. Typically, the MMI is connected
to one of these devices. This is a generic term covering a large range of
programmable devices used in machine control applications.
MTR
:
This stands for
M
essage
T
riggering
R
egister. The
MTR
is the
register that holds the message number for the
MMI
to display.
Symbology
Warning! Indicates that the reader should pay special
attention to the accompanying text. Precautionary steps
should be taken to insure that the installation is in compli-
ance with warnings. Warnings include hazardous condi-
tions that could cause personal injury or equipment
damage if care is not taken.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
