STEP #6
Final Preparations Prior to Use
Remove the plastic film from the cooktop. Clean
the cooktop before you use it for the first time. A
thorough cleaning with a recommended cooktop
cleaner (
Cerama Bryte Ceramic Cooktop
Cleaner
) will provide a clean, shiny coating on
the cooktop surface.
The next section of the manual covers cooktop
use, maintenance and service information.
Please keep these instructions with the
KENYON cooktop for future reference.
Name Plate
Label Location
10
Warning - Grounding
The entire appliance must be grounded at all times when the
electrical power supply is on. Do not ground the appliance with the
neutral house supply wire (white). A separate ground must be used.
!
STEP #5
Electrical Connection
Before proceeding further, verify that the power supply is disconnected. Verify that the
appropriate electrical supply requirements have been met. Please refer to the table on page 5
for appropriate electrical requirements. The cooktop is supplied with a 36-inch long
conduit for a connection to an accessible
junction box. The 240V and 208V conduit
consists of three insulated wires. There are two insulated hot lead conductors (red and black)
and one insulated ground conductor (green). The 120V conduit consists of three
insulated wires. There is the hot lead
conductor (black), the nuetral conductor (white) and one insulated ground conductor (green).
Attach conductor wires to residence wiring in accordance with national, state and local
electric codes.
