INITIAL START-UP
The cooktop is designed with a 2 step ON, and 1 step OFF for safety reasons,
requiring at least 2 different touches of the controls to activate an element, but only one touch to
deactivate an element or the entire unit.
Clean the cooktop before you use it for the first time. A thorough cleaning with our
recommended cooktop cleaner (
Cerama Bryte Ceramic Cooktop Cleaner
) will provide a
coating on the cooktop prior to its first use. A sample is included with your Kenyon cooktop.
The cooktop surface should be free of any foreign substances before use.
CONTROLS OF LITE-TOUCH™ Q COOKTOP
To activate a heating element, first the master power must be turned on by placing and holding a
finger over the circular area next to the master power graphic. An audible beep will be heard and
a light next to the master power graphic will illuminate. Then the desired element must be turned
on, by placing a finger over the circular area marked ON/OFF for that element. The same beep
will sound and a light will illuminate. Then the heat level is chosen, by
holding a finger over the circular areas marked with + or -. Touching the + first will incrementally
set the heat level from settings 1 thru 8 with a beep and corresponding number of lights
illuminated. Touching the - first will incrementally set the level from settings 8 thru 1 with a beep
and corresponding number of lights illuminated. When the desired heat level is reached the fin
-
ger is removed and the cooktop remains at that heat level. If an element is activated, but no heat
level chosen, the element will automatically turn off in 10 seconds.
To change the heat level place finger on + or - graphic of desired element to change heat level
incrementally up or down.
To deactivate an element, touch circular area marked ON/OFF to turn the element off. Also the
master power ON/OFF can be touched and the entire cooktop will be deactivated.
12
Key graphic
for lock function
Lock function LED
Master power LED
Lock function button
Master power button
Master power graphic
Element indicator
graphic
Element heat level indicator
Hot surface
indicator LEDs
- button decreases
heat setting
+ button increases
heat setting
Element ON/OFF button
Element activation LED
Fig. D
