manualshive.com logo in svg

Kenwood Z-638, Instruction Manual

Share
Download
Kenwood Z-638 Instruction Manual Download Page 27

Toggles ON or OFF the mute control on the built-in amplifier.
Turning ON this control enhances the preout quality.

Display

Setting

"AMP Mute OFF"

The built-in amplifier activates.

"AMP Mute ON"

The built-in amplifier deactivates.

Built-in Amp Mute Setting <In Standby mode>

Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.

Display

Setting

"System Q ON"

The System Q factors are displayed.

"System Q OFF"

The System Q factors aren't displayed.

System Q

— 27 —

Setting the central frequency boosted by B.M.S.

Display

Setting

"AMP Freq Normal"

Boost with the normal central frequency

"AMP Freq Low"

Drop the normal central frequency 20% 

B.M.S. Frequency Offset

Adjust the bass boost level of the external amplifier using the
main unit.

Display

Setting

"AMP Bass Flat"

Bass boost level is flat.

"AMP Bass +6"

Bass boost level is low (+6dB).

"AMP Bass +12"

Bass boost level is mid (+12dB).

"AMP Bass +18"

Bass boost level is high (+18dB).

• Refer to the catalog or instruction manual for power amplifiers that

can be controlled from this unit.

• For amplifiers there are the model that can be set from Flat to +18

dB, and the model that can be set from Flat to +12 dB. 
When an amplifier is attached that can only be set to +12, even if
”AMP Bass +18” is selected it won’t operate correctly.

B.M.S. (Bass Management System)

Z638_U.S  01.12.3  1:48 PM  Page 27

Summary of Contents for Z-638









































Reviews:

No comments

Brands by name

Popular brands

Load more brands