Kenwood Z-638 Instruction Manual Download Page 10

Page: 10 / 40

Switching the upper and lower part display.

Select the Display Type

Press the [DISP] button.

Enter Display Control mode

Press the [S.A] button.

"Display Control Mode On" is displayed.

Switch the Upper part display

Press the [FM] or [AM] button.

Switch the Lower part display

Press the [

] or [

] button.

Each time the button is pressed the display switches.
The Reference for the display content is after this operation's
explanation.

Exit Display Control mode

Press the [S.A] button.

• The same information can't be displayed on the Upper part display

and lower part display.

• The Upper part display and Lower part display switching can be

selected when "Display Type A" is selected in <Display Mode
Switching> (page 9).

• When "Display Type B" is selected the Lower part display content

is clock ON or OFF.

Switching Upper and Lower Part Display

• Demonstration can be selected when "Display Type A" or "Display

Type C" is selected in <Display Mode Switching> (page 9).

• Only "Display Type A" and "Display Type B" can be selected in "ALL

OFF".

Switching the information displayed in Standby.

Enter Standby

Press the [SRC] button.

Select the "ALL OFF" display.

Switch the display

Press the [S.A] button.

Each time the button is pressed the display switches as shown
below.

Information

Display

Demonstration
Date & Clock
Standby display

"ALL OFF"

Switching the Standby Display

Switching the Full screen display.

Press the [S.A] button.

Each time the button is pressed the display switches as shown
below.

Information

Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Spectrum Analyzer 4
Spectrum Analyzer 5

Full Screen display can be selected when "Display Type C" is
selected in <Display Mode Switching> (page 9).

Switching Full Screen Display

General features

— 10 —

English

Z638_U.S 01.12.3 4:38 PM Page 10

Summary of Contents for Z-638









































Search results

Summary of Contents for Z-638

Reviews:

Related manuals for Z-638

Brands by name

Popular brands

Kenwood Z-638, Instruction Manual

Search results

Summary of Contents for Z-638

Reviews:

Related manuals for Z-638

Brands by name

Popular brands