10
Demo mode
When the AC power cord is first connected, the
unit will enter the demonstration mode.
To cancel the demonstration mode :
Press the EX.BASS/DEMO button.
•
The demonstration mode will be cancelled and
the unit will be in the low power consumption
mode.
To return to the demonstration mode :
When the unit is in the standby mode, press the
EX.BASS/DEMO button again.
Notes :
•
When the unit is in the low power consumption
mode, the display will disappear.
•
When the power is on, the EX.BASS/DEMO but-
ton can be used to select the extra bass mode.
EX.BASS
/DEMO
Remote control
•
When inserting or removing the batteries, push
them towards the battery terminals.
•
Installing the batteries incorrectly may cause the
unit to malfunction.
Precautions for battery use :
•
Replace all old batteries with new ones at the
same time. Do not mix old and new batteries.
•
Remove the batteries if the unit will not be used
for long periods of time. This will prevent poten-
tial damage due to battery leakage.
•
Do not use rechargeable batteries (nickel-
cadmuim battery, etc.)
Note concerning use :
•
Replace the batteries if the operating distance
is reduced or if the operation becomes erratic.
•
Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit
with a soft cloth.
•
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
•
Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
•
2 “AA” size batteries (UM/SUM-3, R6,
HP-7 or similar)
30
30
