19
RADIO OPERATION
Tuning
1
Press the ON/STANDBY button to turn the
power on.
2
Press the TUNER (BAND) button.
3
Press the TUNER (BAND) button to select the
desired frequency band. (FM ST, FM or AM)
4
Press the TUNING/TIME (
%
UP or
fi
DOWN) but-
ton to tune into the desired station.
Manual tuning :
Press the TUNING/TIME (
%
UP or
fi
DOWN) button
as many times as required to adjust the frequency
shown on the display to the frequency of the de-
sired station.
Auto tuning :
When the TUNING/TIME (
%
UP or
fi
DOWN) button
is pressed for more than 0.5 second, scanning will
start automatically and the tuner will stop at the
first receivable broadcast station.
Notes :
•
When radio interference occurs during auto scan
tuning, auto scan tuning may stop automatically
at that point.
•
If a weak station signal is found during auto scan
tuning, the station will be skipped.
•
To stop the auto tuning, press the TUNING/TIME
(
%
UP or
fi
DOWN) button again.
•
When a RDS (Radio Data System) station is
tuned in, the frequency will be displayed first,
and then the RDS indicator will light up. Finally,
the station name will appear.
5
To receive an FM stereo transmission, press the
TUNER (BAND) button so that the “ST.” indica-
tor on the display lights up.
•
“ ” will light up when an FM broadcast is in
stereo.
6
If the FM reception is weak, press the TUNER
(BAND) button so that the “ST.” indicator goes
off.
•
The reception changes to mono, the sound be-
comes clearer.
After use :
Press the ON/STANDBY button to enter the
standby mode
Note :
•
The last station turned in will be recalled, even
after changing the tuning band or the function,
or after switching the unit to the standby mode.
4
1
2
,
3
,
5
,
6
2
,
3
,
5
,
6
4
1
