Installing the Main Unit
Installing in Japanese-Made Cars-2
■
or
Accessory
B
Accessory
B
Accessory
C
Accessory
C
When the vehicle bracket is attached as in Toyota vehicles that use
a hole in the
●
position in the figure below.
Fasten Accessory
C
on both sides as shown in the figure below.
1
Fasten the vehicle bracket.
2
Bend the point of Accessory
C
, and fasten the bracket.
3
If this device can’t be fastened with screws in the 2 places on the right and left due to the vehicle
bracket shape, use the installation fastener (Accessory
C
) and fasten the bracket.
Using a screwdriver or pliers bend the right
and left of Accessory
C
so that it can be
fastened to the vehicle bracket hole.
Not use the Hard
Rubber Frame
(
Accessory
D
).
Audio Unit.etc
Screw (Provided with
the Audio Unit.etc)
Screw (Provided with
the Audio Unit.etc)
4
VZ-7000_B54_Eng 02.3.26 6:43 PM Page 4
