background image

1: Introduction

Page 3

Kenwood 72X and 62X TrueX User’s Guide

1: Introduction

Thank you for purchasing the world’s fastest CD-ROM drive. Your new CD-ROM
drive benefits from blazing fast TrueX™ technology from Zen Research. It’s the
only drive in the world that delivers  high data transfer rates  at low rotational
speeds across the  disc. 

System Requirements

To achieve the maximum performance from your 72X or 62X TrueX CD-ROM,
Kenwood recommends the following configuration for your PC:

• Intel’s 440LX chipset or better (or equivalent) is recommended for best results
• 233 MHz Pentium

®

with MMX or Higher (or Equivalent)

• 32 MB RAM 
• PCI Bus Master Controller
• PCI Bus Master EIDE Drivers for Windows 95/NT

®

• Windows

®

95 OSR2 or Windows

®

98

Package Contents:

• 72X or 62X TrueX™ CD-ROM Drive
• IDE Cable
• Audio Cable
• Four Screws
• Installation & User’s Guide
• Quick Install Guide
• Registration Card

*Maximum performance may not be possible in some configurations and with some media.

** A DOS software driver may be required to install Windows® 95.
This driver is available from our web site: http://www.kenwoodtech.com

KW-40 72/62X atapi manual  12/13/99 3:25 PM  Page 5

Summary of Contents for UCR 420

































Reviews: