Kenwood UBZ-LJ9SETE, Instruction Manual

Page: 23 / 120

3
1. Safety instructions
IMPORTANT SAFETY INSTRUCTIONS
Attention: Read this page carefully to ensure safe operation of the device.
Read instructions carefully!
• Follow all safety and operating instructions when using this product.
Keep the instructions in a safe place!
• You should keep the safety and operating instructions for future reference.
Follow the warning instructions!
• You should strictly follow all warnings provided on the product and listed in the operating
instructions.
1.1 Precautions
• Do not charge the transceiver or battery when they are wet.
• Make sure that no metallic objects get between the transceiver and the battery.
• Only use accessories recommended by KENWOOD.
• If any part of the transceiver is damaged, do not touch the damaged parts.
When connecting headphones or a headset, reduce the volume of the transceiver. Also note that
turning off the squelch can change the volume.
•
Do not place a clip microphone cord with the earphone/holder around your neck while around
machinery where the cord may become entangled.
•
Do not place the transceiver on an unstable surface. If the transceiver turns On/Off due to drop-
ping or severe shock, the volume and channel configurations may be reset.
• Be careful not to injure your eyes with the end of the antenna.
• Do not immerse the transceiver in water.
• Always switch off the transceiver when connecting accessories.
• The device is disconnected from the mains at the power supply. Make sure that the power supply
plug is easily accessible.
•
When disposing of the batteries, the applicable legal regulations and local regulations in your
country or region must be complied with.
•
If a commercially available neck strap is used, be careful not to get the neck strap caught in nearby
machine parts.
Warning!
Turn off the transceiver in these locations:
• In an explosive atmosphere (flammable gas, dust particles, metal powder, wood dust, etc.).
• When refuelling and when staying at gas stations.
• In locations where there is a risk of explosion or where blasting work is taking place.
• On the plane. (Any use of the transceiver may only be carried out by order and according to the
instructions of the crew.)
• Wherever there are signs, etc. asking to switch off transceivers, among other things, among other,
in medical institutions.
•
In the vicinity of people with pacemakers.
Table of contents
Content Page
1. Safety instructions
1.1 Precautions
1.2 Battery information
1.3 Declaration of Conformity
1.4 EU / UK contact address
2. Before Start-up
2.1 Unpacking
2.2 Components and functions
2.3 Install Li-ion battery
2.4 Charging the battery
2.5 Installation of the belt clip
2.6 Using an optional headset
3. Using the transceiver
3.1 Switching the device On and Off
3.2 Adjusting the volume
3.3 Sending and receiving
3.4 Full Reset Function
4. Setting the transceiver
4.1 Switching channels
4.2 Squelch
4.3 QT tone and DQT code settings
4.4 Voice controlled transmission Set up (VOX)
4.5 Ringing tone
4.6 Key tone
4.7 Roger beep
4.8 Feedback tone
4.9 Battery charge level
4.10 Monitor function
4.11 Channel search (Scan)
4.12 Energy saving function
5.
Troubleshooting
6. Disposal
7. Technical specifications
8. Guarantee
9. SAR values