Kenwood TM-942A, Instruction Manual

Page: 19 / 60

15
GROUP A-1
MODE
Press to change the operating mode pair. There are 3
pairs: USB/ LSB, FM/ AM, and CW/ FSK. Press and
hold to toggle the mode within each pair: USB
LSB,
FM AM, or CW FSK.
FINE
Press to toggle the FINE tuning function ON or OFF. “F”
appears on the display when this function is ON.
1MHz
Press to toggle the 1MHz Up/ Down function ON or OFF.
“M” appears on the display when this function is ON.
Press and hold to change the 1MHz Up/ Down frequency
step size. Press the [
c
]/ [
d
] keys or turn the
MULTI/ CH control to change the frequency step size,
then press either [EXIT] or the MULTI/ CH control to
accept the new setting.
DOWN
Press to move down the amateur radio band one step.
Press and hold to continuously cycle down through the
amateur radio bands.
UP
Press to move up the amateur radio band one step.
Press and hold to continuously cycle up through the
amateur radio bands.
GROUP A–2
A/B
Press to alternate between VFO A and VFO B on the
main transceiver.
SPLIT
Press to activate SPLIT operation on the main
transceiver.
TF SET
When SPLIT operation is activated, press and hold this
key, then turn the Tuning control to adjust the TX
frequency. Press the Tuning control to toggle between
the Tuning control and MULTI/ CH control mode. “TUN”
or “MLTI” appears on the display to indicate the selected
control mode.
A=B
Press to copy the data of the currently selected VFO to
another VFO.
XIT
Press to switch the Transmit Incremental Tuning function
ON or OFF. When it is ON, “XIT” appears on the display,
along with the offset frequency. Press and hold to clear
the XIT offset frequency.