10
BASIC OPERATION
SWITCHING POWER ON/ OFF
Press
[ ]
to switch the transceiver ON.
Press
[ ]
again to switch the transceiver OFF.
ADJUSTING THE VOLUME
Press the
key programmed as
[Volume Up]
to increase the volume. Press the
key programmed as
[Volume Down]
to decrease the volume.
SELECTING A ZONE AND CHANNEL
Select the desired zone and channel using the keys programmed as
[Zone Up]
/
[Zone Down]
and
[Channel Up]
/
[Channel Down]
.
•
“G1” (Zone 1)/ “16” (Channel 16) appears on the display.
TRANSMITTING
1
Select the desired zone and channel.
2
Press the key programmed as
[Monitor]
or
[Squelch Off]
to check whether or
not the channel is free.
•
If the channel is busy, wait until it becomes free.
3
Press the
PTT
switch and speak into the microphone. Release the
PTT
switch
to receive.
•
For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 cm to 4 cm) from your mouth.
RECEIVING
Select the desired zone and channel. If signaling has been programmed on the
selected channel, you will hear a call only if the received signal matches your
transceiver settings.
Receiving Group Calls
When you receive a group call and the received group ID matches the ID set up
on your transceiver, you can hear the caller’s voice.
Receiving Individual Calls
When you receive an individual call, a ringing tone will sound. To respond to the
call, press and hold the
PTT
switch and speak into the transceiver as you would
during a normal transmission.
