7
TK-880
■
Status Entry (5-tone)
It allows the operator to input the status and transmit it to
the base station.
Both TX address and “Selectable status digit” must be
programmed to perform the operation. Press [Status entry]
key to access Status entry mode. “TX address” of the chan-
nel appears on LCD.
Enter the desired code using a numeric keypad. If the
transceiver does not have the numeric keypad, you can use
[Channel up]/[Channel down] key to select the desired num-
ber and press [C] key to enter. The cursor moves to next
position.
■
Status List (5-tone)
Press [Status list] key to enter Status list mode. Select
the check box of “5-tone - System parameters - Selectable
status digit”. The number of digit you selected in “5-tone -
Status list” will be displayed on LCD. If “Status list” has not
been programmed, same digits of status list code that you
checked as “Selectable status” digits will appear on LCD.
To select the status list, use [Channel up]/[Channel
down] key or [2]/[8] key on the microphone keypad.
■
Talk Around
When Talk around function is activated, “TA” appears
and the transceiver transmits on the receive frequency, us-
ing receiver’s QT/DQT code.
The operator can call the other party directly (without re-
peater).
■
Transfer (5-tone)
When you select “5-tone” for “Signalling type for de-
code”, this function is used for transmitting 5-tone code.
Press the [Transfer] key to activate the transfer function.
“TRANSFER” appears on the LCD.
When the target 5-tone code is received, you can select
to transfer the code to another transceiver. When a mobile
transceiver receivers the target 5-tone code, a mobile trans-
ceiver transfers the received 5-tone code to a portable.
When “Special setting” is selected (enabled) and using
decode format, this parameter is not valid.
■
None
When you press this key, the transceiver emits the “Key
input error tone” (no function is performed).
■
Volume Up/Down
When this key is pressed, the volume level is increased/
decreased and repeats if held for 200ms or longer.
■
Function Table
Function
DTMF/2-tone/DMS
5-tone
None
Yes
Yes
Auto dial
Yes
Yes
Auto dial programming
Yes
Yes
AUX A
Yes
Yes
AUX B
Yes
Yes
Note : Only when voice scrambler is not selected.
Call 1
No
Yes
Call 2
No
Yes
Call 3
No
Yes
Call 4
No
Yes
Call 5
No
Yes
Call 6
No
Yes
Channel down
Yes
Yes
Channel entry
Yes
Yes
Channel name
Yes
Yes
Channel up
Yes
Yes
Emergency call
Yes
Yes
Fixed volume
Yes
Yes
Group down
Yes
Yes
Group up
Yes
Yes
Home channel
Yes
Yes
Horn alert
Yes
Yes
Key lock
Yes
Yes
Monitor
Yes
Yes
Monitor momentary
Yes
Yes
Operator selectable tone
Yes
Yes
Public address
Yes
Yes
Queue
Yes
Yes
Radio password
Yes
Yes
Receive entry
No
Yes
Scan
Yes
Yes
Scan delete/add
Yes
Yes
Scrambler
Yes
Yes
Selcall entry
Yes
Yes
Selcall list
Yes
Yes
S Status entry
Yes
Yes
S Status list
Yes
Yes
Send GPS
Yes
No
Shift
Yes
Yes
Squelch level
Yes
Yes
Squelch momentary
Yes
Yes
Squelch off
Yes
Yes
Status entry
No
Yes
Status list
No
Yes
Talk around
Yes
Yes
Transfer
No
Yes
Volume down
Yes
Yes
Volume up
Yes
Yes
OPERATING FEATURES
