12
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by
JVC KENWOOD
Corporation
.
Note:
If set up by your dealer, your transceiver may use the MDC-1200 feature in place of
FleetSync. MDC-1200 and FleetSync cannot be operated simultaneously.
S
ELCALL
(S
ELECTIVE
C
ALLING
)
A Selcall is a voice call to a particular station or to a group of stations.
■
Transmitting
1
Select your desired zone and channel.
2
Press the key programmed as
Selcall
or
S Status
.
3
Press / (if the key assignment list selection is configured as “Enabled”) or
<B
/
C>
to select
the ID of the station you want to call.
• You can also enter the station ID directly by using the keypad.
4
Press
the
PTT
switch and begin your conversation.
• You can also press
■
to page the ID, rather than talking.
■
Receiving
If enabled by your dealer, an alert tone will sound and the LED will blink when a Selcall has been
received. To respond to the call, press the
PTT
switch and speak into the microphone.
■
Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number. Each transceiver
must have its own Fleet and ID number.
Note:
The ID range may be limited by programming.
P
AGING
C
ALL
1
Select your desired zone and channel.
2
Press the key programmed as
Paging Call
to transmit your PTT List ID, to request a call.
S
TATUS
M
ESSAGE
Status messages are 2-digit codes ranging from 10 to 99 (80 ~ 99 are reserved for special messages).
A maximum of 15 received messages can be stored in the stack memory of your transceiver and can
be reviewed after reception. The
icon appears when a message is stored in the stack memory.
■
Transmitting
If programmed by your dealer, you can press the
Call 1
~
Call 3
keys to quickly send
preprogrammed status messages. You can also manually send status messages.
