6
BASIC OPERATIONS
S
WITCHING
P
OWER
ON/ OFF
Press the
switch to switch the transceiver ON.
Press and hold the
switch for approximately 1 second to switch the
transceiver OFF.
A
DJUSTING
THE
V
OLUME
Press the
▲
key to increase the volume and the
▼
key to decrease the volume.
S
ELECTING
A
C
HANNEL
Select your desired channel by pressing a key from
1
to
4
.
If Group has been programmed onto a key, press the
Group
key to select the
second group of channels. While active, the LED beside the key lights. At this
time, press a key from
1
to
4
to select a channel from 5 to 8. To return to
channels 1 through 4, press the
Group
key again.
Note:
You cannot use the Group function while operating in Emergency mode.
T
RANSMITTING
Note:
Before transmitting, first monitor the channel to make sure it is not already in use.
1
Select your desired channel by pressing a channel key (
1
~
4
).
• If the channel is busy, wait until it becomes free.
2
Press the microphone
PTT
switch and speak into the microphone. Release
the
PTT
switch when you have finished speaking.
• For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.
R
ECEIVING
1
Select your desired channel by pressing a channel key (
1
~
4
).
2
When you hear a signal, readjust the volume level if necessary.
3
Respond to the call as described in step 2 of “T
RANSMITTING
”, above.
Summary of Contents for TK-7108
Page 15: ......
