19
DTMF N
UMBER
D
ISPLAY
Note:
This feature can only be activated when DTMF Signalling is turned OFF.
When you receive a DTMF code containing at least 3 digits, it will appear on the
display. Each successive digit will continue to scroll across the display, as long
as each digit is received within 1 second of the previous digit. If no digit is
received for more than 1 second, then a new digit is received, the display will
clear and begin with the new digit.
Cancel the DTMF Number Display by pressing any key other than
VOL
/
(left side).
You can transmit DTMF codes by entering them into an optional microphone with
a DTMF keypad (KMC-32).
B
EGINNING
/ E
ND
OF
T
RANSMISSION
ID S
IGNAL
Your dealer can enable or disable the Beginning/ End of Transmission
identification signals. These signals are used to access and release some
repeaters and telephone systems.
A Beginning of Transmission ID Signal is sent when you press the
PTT
switch.
An End of Transmission ID Signal is sent when you release the
PTT
switch.
Summary of Contents for TK-7100
Page 24: ......
