Kenwood TK-7100, Instruction Manual

Page: 12 / 24

8
BASIC OPERATIONS
S
WITCHING
P
OWER
ON/ OFF
Press the switch to switch the transceiver ON.
• A beep sounds and “ ” appears momentarily.
• If the Radio Password function is programmed, “ ” will appear on the display
when the power is turned ON. Refer to “Radio Password”, below.
Press and hold the switch for approximately 1 second to switch the
transceiver OFF.
■
Radio Password
To unlock the transceiver, enter the password as described below. The
password can contain a maximum of 6 digits.
To enter the password using the keypad of an optional microphone (KMC-32):
1 Press the microphone numeric keys corresponding to the password digits.
2 Press the microphone # key to confirm the password.
• If you enter the wrong password, an error tone sounds and the transceiver
remains locked.
To enter the password using the transceiver front panel keys:
1 Press the front panel keys corresponding to the password digits:
MON = 1, SCN = 2,
●
= 3, O = 4.
2 Press the CH key (right side) to confirm the password.
• If you enter the wrong password, an error tone sounds and the transceiver
remains locked.
A
DJUSTING THE
V
OLUME
Press the VOL key (left side) to increase the volume. Press the key (left
side) to decrease the volume.
If Monitor has been programmed onto a key, you can press and hold the Monitor
key to listen to background noise while adjusting the volume level (refer to
“M
ONITOR
” on page 18).