BASIC OPERATIONS
S
wiTching
p
ower
on/oFF
Press and hold
for approximately second to turn the transceiver power ON.
Press and hold
again to turn the transceiver OFF.
■
Transceiver Password
If the transceiver is password protected, “PASSWORD” will appear on the
display when the power is turned ON. To unlock the transceiver, enter the
password:
1
Select a character using / .
• If you are using a microphone keypad, you can enter the password by direclty.
2
Press
to enter the selected character.
• This step is unnecessary when using the keypad.
3
Repeat steps and 2 to enter the entire password.
• Press
or
#
to delete a character. Press and hold
or
#
to delete all
characters.
4
Press
or to confirm the entry.
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
• The password can contain a maximum of 6 digits.
A
djuSTing
The
v
olume
Press the keys programmed as
Volume Up
/
Volume Down
to adjust the volume
level.
S
elecTing
A
Z
one
And
c
hAnnel
Select the desired zone using the keys programmed as
Zone Up
/
Zone Down
.
Each zone contains a group of channels.
Select the desired channel using the keys programmed as
Channel Up
/
Channel Down
. Each channel is programmed with settings for transmitting and
receiving.
• You can toggle the display between the zone and channel names and numbers by
pressing the key programmed as
Display Format
, or by accessing the Menu {page 9}.
T
rAnSmiTTing
1
Select the desired zone and channel.
2
Press the key programmed as
Monitor
or
Squelch Off
to check whether or
not the channel is free.
• If the channel is busy, wait until it becomes free.
Summary of Contents for TK-5720
Page 28: ......