Kenwood TK-5720, User Manual

Page: 21 / 28

6
ADVANCED OPERATIONS
dTmF (d
uAl
T
one
m
ulTi
F
requency
) c
AllS
■
Making a DTMF Call
Note: DTMF calls can be made only in analog operation.
Manual Dialing (Microphone Keypad Only)
1
Press and hold the microphone PTT switch.
2
Enter the desired digits using the microphone keypad.
• If you release the microphone PTT switch, transmit mode will end even if the
complete number has not been sent.
• If the Keypad Auto PTT function has been enabled by your dealer, you do not
need to press the PTT switch to transmit; you can make the call simply by
pressing the microphone keys.
Store & Send
1
Enter up to 30 digits using the microphone keypad.
• Alternatively, you can enter digits by using
/
{page }.
2 Press the microphone PTT switch to make the call.
■
Autodial
Autodial allows you to quickly call DTMF numbers that have been programmed
onto your transceiver.
1
Press the key programmed as
Autodial
, or access the Menu {page 9}.
2 Press / to select your desired number, or enter the list number directly
(0 ~ 32).
• The stored entry appears on the display.
3
Press the microphone
PTT
switch to make the call.
■
Stun Code
This function is used when a transceiver is stolen or lost. When the
transceiver receives a call containing a stun code, the transceiver becomes
disabled. The stun code is cancelled when the transceiver receives a call with
a revive code.
e
ncrypTion
Note: You must install the Secure Cryptographic Module (SCM) to use the Encryption feature.
Press the key programmed as
Encryption
, or access the Menu {page 9}, to
switch the transceiver to secure (encrypted) transmission.
• Pressing the microphone PTT switch after the Encryption function has been turned ON
encrypts the transmitted signal.